All technical ins and out for your product, as well as frequently asked questions and tutorials. Get to know your product from tip to toe!
| ECS RC410-M Motherboard BIOS Screens |
 |
Press
<F2> to access the CMOS Setup Utility.
 |
| Setting |
Parameter |
| Standard CMOS Setup |
Press <Enter> to access submenu. |
| Advanced BIOS Features |
| Advanced Setup |
| Features Setup |
| Power Management Setup |
| PCI / Plug and Play Setup |
| BIOS Security Features |
| CPU PnP Setup |
| Hardware Monitor |
| Load Optimal Defaults |
Pressing <Enter> will prompt to press Ok or Cancel. |
| Save Change and Exit |
| Discard Changes and Exit |
|
 |
| Setting |
Parameter |
| System Time |
hh -> 0-23
mm -> 0-59
ss -> 0-59 |
| System Date |
Month: Jan - Dec
Day: 01 - 31
Year: 1999 - 2099 |
Primary IDE Master
|
Press <Enter> to access submenu. |
| Primary IDE Slave |
| Secondary IDE Master |
| Secondary IDE Slave |
| Third IDE Master |
| Fourth IDE Master |
| Fifth IDE Master |
| Sixth IDE Master |
| Floppy A |
Disabled
360 KB 5¼"
1.2 MB 5¼"
720 KB 3½"
1.44 MB 3½"
2.88 MB 3½" |
System Serial Number
|
Values detected by system BIOS. |
| System Memory |
| BIOS Revision |
| BIOS Release Date |
|
 |
| Setting |
Parameter |
Device
|
Automatically detected by system BIOS. |
| Vendor |
| LBA Mode |
| PIO Mode |
| Async DMA |
| Ultra DMA |
| Type |
Not Installed
Auto
CD/DVD
ARMD |
| PIO Mode |
Auto
0, 1, 2, 3, 4 |
| DMA Mode |
Auto
SWDMA0
SWDMA1
SWDMA2
MWDMA0
MWDMA1
MWDMA2
UDMA0
UDMA1
UDMA2 |
|
 |
| Setting |
Parameter |
| Share Memory Size |
32MB
64MB
128MB
256MB |
| Quick Boot |
Enabled
Disabled |
| 1st Boot Device |
Removable Dev.
CD/DVD
HDD
Disabled |
| 2nd Boot Device |
| 3rd Boot Device |
| Hard Disk Drives |
Press <Enter> to access submenu. |
| Removable Drives |
| CD/DVD Drives |
| Try other Boot Device |
No
Yes |
| Bootup Num-Lock |
On
Off |
| Boot To OS/2 > 64MB |
No
Yes |
| Auto Detect DIMM/PCI Clk |
Enabled
Disabled |
| Spread Spectrum |
| BIOS Write Protect |
| DIMM Voltage Adjust Function |
Normal
+ 50mV
+100mV
+150mV |
| Execute Disable Bit |
Enabled
Disabled |
| CPU TM function |
Disabled
TM1 |
|
 |
| Setting |
Parameter |
| 1st Drive |
Specifies the boot sequence from the available devices. |
|
 |
| Setting |
Parameter |
| OnBoard Floppy Controller |
Disabled
Enabled |
| OnBoard PCI IDE Controller |
Disabled
Primary
Secondary
Both |
| OnBoard SATA-IDE |
Disabled
IDE
RAID |
| Audio Device |
Disabled
Auto |
| Ethernet Device |
Disabled
Enabled |
| Onboard LAN Boot ROM |
| OnBoard USB Function |
| USB Function For DOS |
|
 |
| Setting |
Parameter |
| ACPI Aware O/S |
No
Yes |
| Power Management |
Enabled
Disabled |
| Suspend mode |
S1
S3 |
| Suspend Time Out |
Disabled
1, 2, 3, 4, 5, 10,
15, 32, 64 minutes |
| Resume on RTC Alarm |
Enabled
Disabled |
| PS2 KB resume from S3 |
Any Key
Disabled |
PS2 MB resume from S3
|
Enabled
Disabled |
| LAN/Ring Power On |
| USB KB Wake Up from S3 |
|
 |
| Setting |
Parameter |
| Boot Graphics Adapter Priori |
IGD
PEG/IGD
PCI/IGD |
| Allocate IRQ to PCI VGA |
Yes
No |
| PCI IDE BusMaster |
Enabled
Disabled |
|
 |
| Setting |
Parameter |
| Supervisor Password |
Option only available when password has been set. |
| Change Supervisor Password |
Press <Enter> to set or change password. |
|
 |
| Setting |
Parameter |
| Manufacturer |
Values detected by system BIOS. |
| OverClock CPU FSB Clock |
Default
201 - 327 MHz
Note: Press <+> or <-> to change value. |
| FSB Frequency |
|
| CPU Clock |
|
| DRAM Frequency |
|
|
 |
| Setting |
Parameter |
| Vcore |
Values detected by system BIOS. |
| Vdimm |
| VccNB |
| Vcc3V |
| Vcc12V |
| System Fan Speed |
| CPU Fan Speed |
| System Temperature |
| CPU Temperature |
| SMART Fan Control |
Enabled
Disabled |
| SMART Fan2 Control |
|
