|
|
All technical ins and out for your product, as well as frequently asked questions and tutorials. Get to know your product from tip to toe!
 |
IXTREME 6052
P/N : P851008201
|
|
| Columbia V Motherboard BIOS Screens |
Press <F2> to access the AMIBIOS Setup utility.
Note: The screens of your BIOS Setup may slightly differ from the screenshots shown here, because options may have been added or removed during a BIOS update.
|
 |
| Setting |
Parameter |
| System Date |
Month: Jan - Dec
Day: 01 - 31
Year: 1980 - 2099 |
| System Time |
Time is 24 hour format
Hour: 00 -23
Minute: 00 - 59
Second: 00 - 59
(1:30AM = 01:30:00,
1:30PM = 13:30:00) |
| Floppy Drive A |
Not Installed
1.2 MB 5¼
720 KB 3½
1.44 MB 3½
2.88 MB 3½ |
| Floppy Drive B |
| Primary IDE Master |
Press <Enter> to access submenu |
| Primary IDE Slave |
| Secondary IDE Master |
| Secondary IDE Slave |
|
 |
| Setting |
Parameter |
| Advanced Configuration |
Press <Enter> to access submenu |
| Chipset Configuration |
| Power Management Configuration |
| Plug and Play Configuration |
| Peripheral Configuration |
| Hardware Monitor Configuration |
| SMBIOS Event log |
|
 |
| Setting |
Parameter |
| Set Supervisor Password |
Pressing <Enter> will pop up a window in which to enter the password.
Note: The option Set User Password will only be available after entering a supervisor password. |
| Set User Password |
| Password Check |
Setup
Always |
|
 |
| Setting |
Parameter |
| Exit Saving Changes |
Pressing <Enter> will pop up a dialogue box asking to press <Enter> again to confirm or <Esc> to abort. |
| Exit Discarding Changes |
| Load Default Settings |
| Load Original Values |
|
 |
| Setting |
Parameter |
| Type |
Not Installed
User
Auto
CD/DVD
ARMD |
| Cylinders |
0 - 65535 |
| Heads |
0 - 255 |
| Write Precompensation |
Enter write precompensation cylinder |
| Sectors |
0 - 255 |
| Maximum Capacity |
Auto-detected by the system. |
| LBA Mode |
On
Off |
| Block Mode |
| Fast Programmed I/O Modes |
Auto
0 - 6 |
| 32 Bit Transfer Mode |
On
Off |
|
 |
| Setting |
Parameter |
| Boot Device Priority |
Press <Enter> to access submenu |
| Recovery Boot |
Enabled
Disabled |
| Try Other Boot Devices |
Yes
No |
| Display Customer Logo |
Enabled
Disabled |
| Floppy Access Control |
Read-Write
Read-Only |
| BootUp Num-Lock |
On
Off |
| S.M.A.R.T. for Hard Disks |
Enabled
Disabled |
| Interrupt Mode |
PIC
APIC |
| Boot To OS/2 |
Yes
No |
| PS/2 KB/MS device mode |
Present
Auto |
|
 |
| Setting |
Parameter |
| USB Function |
Enabled
Disabled |
| USB 2.0 support |
| USB Legacy Support |
| IEEE1394 Device |
Enable
Disabled |
| Share Memory Size |
N/A
4MB
8MB
16MB
32MB
64MB
Note: This option is not available when a video card is used other than the integrated one. |
| Graphic Win Size |
4M
8M
16M
32M
64M
128M
256M |
|
 |
| Setting |
Parameter |
| ACPI Sleep Type |
S1
S3 |
| Initalize VGA BIOS By S3 |
Enabled
Disabled |
| Suspend Time Out (Minute) |
Disabled
1, 2, 4, 8, 10, 20, 30, 40, 50, 60 |
| Resume On Ring |
Enabled
Disabled |
| Resume On PME# |
| Power Button Function |
On/Off
Suspend |
| Restore on AC/Power Loss |
Power Off
Power On
Last State |
| Resume On RTC Alarm |
Enabled
Disabled |
| Alarm Date |
Press<Enter> to select a value.
Note: These settings will only be editable when the option Resume By Alarm is set to Enabled. |
| Alarm Hour |
| Alarm Minute |
| Alarm Second |
|
 |
| Setting |
Parameter |
| VGA Boot From |
Internal
External AGP
External PCI
Auto |
| PCI Slot1 IRQ Priority |
Auto
3
4
5
7
9
10
11 |
| PCI Slot2 IRQ Priority |
| PCI Slot3 IRQ Priority |
|
 |
| Setting |
Parameter |
| Onboard LAN |
Disabled
Enabled |
| Audio Device |
Disabled
Auto |
| Modem Device |
Disabled
Enabled
Auto |
| OnBoard Serial PortA |
Auto
Disabled
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4 |
| OnBoard Serial PortB |
| Serial PortB Mode |
Normal
IrDa
ASKIR |
| OnBoard Parallel Port |
Auto
Disabled
378h
278h
3BCh |
| Parallel Port Mode |
Normal
Bi-Dir
EPP
ECP
Note: Not available when option OnBoard Parallel Port is set to Disabled. |
| EPP Version |
1.9
1.7 |
| Parallel Port IRQ |
Auto
7
Note: Not available when option OnBoard Parallel Port is set to Disabled. |
| Parallel Port DMA |
0
1
3
Note: Not available when option OnBoard Parallel Port is set to Disabled or Auto. |
|
 |
| Setting |
Parameter |
| Chassis Intrusion |
Disabled
Enabled
Reset |
| CPU Fan Fail Alarm |
Yes
No |
| Case Status |
Values are detected automatically by the system. |
| System Temperature |
| CPU Temperature |
| CPU Fan Speed |
| Vcore |
| Vcc3 |
| +5.0V |
| +12.0V |
| -12.0V |
| Battery |
|
 |
| Setting |
Parameter |
| Event log capacity |
Values are detected automatically by the system. |
| Event log validity |
| View DMI event log |
Press<Enter> to read values. |
| Clear all DMI event logs |
Yes
No |
| Event logging |
Enabled
Disabled |
| Mark DMI events as read |
Yes
No |
|
 |
| Setting |
Parameter |
| 1st |
Disabled
IDE-0 to IDE-3
Floppy
CD/DVD
BBS-0(Network) |
| 2nd |
| 3rd |
|
|
