My Product

My Product

All technical ins and out for your product, as well as frequently asked questions and tutorials. Get to know your product from tip to toe!

EASYNOTE J2301

P/N : PB40G00001

Select one star to get the information for this entire model range. Information from other models is included.

Shows information based on one specific model.

Start a new product identification and enter your serial number to reach three stars. This will provide information unique to your product.

EasyNote J2 BIOS Screens

Press the <F2> key during POST in order to access the BIOS Setup screens.

Setting	Parameter
System Time	hh:mm:ss
System Date	mm/dd/yyyy

Setting	Parameter
IDE Configuration	Press [Enter] to access submenu.
Internal Pointing Device	Enabled Disabled
Internal Numeric Pad Lock	Enabled Disabled

Setting	Parameter
Boot Display Device	LCD+CRT LCD CRT
Share Memory Size	64MB 32MB 16MB

Setting	Parameter
Change Supervisor Password	Pressing [Enter] will pop up a window in which to enter the password.
Change User Password
Boot Sector Virus Protection	Disabled Enabled
I/O Interface Security	Press [Enter] to access submenu.
Boot Sector Virus Protection	Pressing [Enter] will pop up a window in which to enter the password.
Hard Drive Security	Not Frozen Frozen

Setting	Parameter
LCD Power Saving	Enabled Disabled
Start Battery Calibration	Press [Enter] to start battery calibration.

Setting	Parameter
Boot Settings Confuguration	Press [Enter] to access submenu.
Boot Device Priority	Press [Enter] to access submenu.
Hard Disk Drives	Press [Enter] to access submenu.
CD/DVD Drives	Press [Enter] to access submenu.
Onboard LAN Boot ROM	Disabled Enabled
Recovery Boot	Enabled Disabled

Setting	Parameter
Save Changes and Exit	OK Cancel
Discard Changes and Exit	OK Cancel
Discard Changes	OK Cancel
Load Optimal Defaults	OK Cancel

Setting	Parameter
Primary IDE Master	Press [Enter] to access submenu.
Secondary IDE Master	Press [Enter] to access submenu.
Secondary IDE Slave	Press [Enter] to access submenu.
ATA(PI) 80Pin Cable Detection	Device Host Host & Device
IDE PIO Pre-Fetch Enable	Enabled Disabled

Setting	Parameter
Primary IDE Master	Screen shows drive information.
Type	Not Installed Auto CD/DVD ARMD
PIO Mode	Auto 0 1 2 3 4
DMA Mode	Auto SWDMA0 SWDMA1 SWDMA2 MWDMA0 MWDMA1 MWDMA2 UDMA0 UDMA1 UDMA2 UDMA3 UDMA4 UDMA5

Setting	Parameter
Secondary IDE Master	Screen shows drive information.
Type	Not Installed Auto CD/DVD ARMD
LBA/Large Mode	Disabled Auto
Block (Multi-Sector Transfer)	Disabled Auto
PIO Mode	Auto 0 1 2 3 4
DMA Mode	Auto SWDMA0 SWDMA1 SWDMA2 MWDMA0 MWDMA1 MWDMA2 UDMA0 UDMA1 UDMA2 UDMA3 UDMA4 UDMA5
S.M.A.R.T.	Auto Disabled Enabled
32Bit Data Transfer	Disabled Enabled

Setting	Parameter
MODEM Interface	UNLOCKED LOCKED
AUDIO Interface	UNLOCKED LOCKED
LAN Network Interface	UNLOCKED LOCKED
CDROM Interface	UNLOCKED LOCKED
CardBus/1394 Interfaces	UNLOCKED LOCKED
USB Interface	UNLOCKED LOCKED

Setting	Parameter
Quick Boot	Enabled Disabled
Quiet Boot	Enabled Disabled

Setting	Parameter
1st Boot Device	Removable Device Hard Drive CD/DVD Network Disbled
2nd Boot Device	Removable Device Hard Drive CD/DVD Network Disbled
3rd Boot Device	Removable Device Hard Drive CD/DVD Network Disbled
4th Boot Device	Removable Device Hard Drive CD/DVD Network Disbled

Setting	Parameter
1st Drive	Shows current drive.

Setting	Parameter
1st Drive	Shows current drive.

Related Items

Specification

Download